Nevion 3GHD-OE - Manual (Page 13)

3GHD-OE / 3GHD-OE-2 Rev. F
nevion.com | 13
5 Connections
The 3GHD-OE and 3GHD-OE-2 has a dedicated connector module; 3GHD-EO-2-C1. This
module is mounted at the rear of the sub-rack. The module is shown in the figure below.
Figure 11 Connector module for 3GHD-OE-2
5.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the sub-
rack frame FR-2RU-10-2.
This manual is also available from our web site:
http://www.nevion.com/ .
5.2 Terminal format support
The different input and output ports on 3GHD-OE and 3GHD-OE-2 can support a number of
formats. The table below show which signal formats are supported on the selected terminals.
Terminal format support for single converter:
Terminal Function Supported Format Mode
OPT1 Optical input SDI, DVB-ASI,
SMPTE310, Transparent
Input
OPT2 Not used.
I/O1
I/O2
O1
O2
Electrical Output
Reclocked DA output
SDI, DVB-ASI, Transparent Output
O1
––
O2
––
Electrical Output
Reclocked DA inverted
output
SDI, Transparent Output
GPI ALARM Open Collector Alarms Wired alarms OC Output