Nevion ETH1000-MKII - Manual (Page 4)

ETH1000-MKII Rev. A
nevion.com | 4
1
Product overview
The Flashlink ETH1000-MKII is a 10/100/1000Base-T to 1000Base-X media converter
module. The module converts a 10/100/1000Mbps Ethernet signal on copper to 1000Mbps
optical on fibre suitable for medium haul applications. The module has one electrical
Ethernet port, and one optical fibre transceiver port (receiver fibre connector and transmit
fibre connector). The speed on the electrical connector is dependent of the DIP switch
setting or GYDA control. Speed will upon link connection automatically be set at the highest
possible speed. User can independently enable or disable 10Mbps, 100Mbps or 1000Mbps.
The fibre link can be used in one or two fibre installations, or occupy two wavelengths in a
WDM or CWDM installation.
Physical
Interface
Ethernet
Optical transmitter
Optical reciver
Microcontroller
Status LED
DIP switch
Optical
output
Optical
input
Remote
control
10/100/1000Mbps
Twisted pair
Ethernet
Figure 1
Figure 2