Nevion VikinX Sublime Series Rev.AB - Manual (Page 10)

VikinX Sublime 3G/HD/SD-SDI Routers Rev. AB
nevion.com | 10
AC Mains connector: IEC 320.
DC output: - +15V, max. 2.2A / -15V, max 1.35A. Maximum 43W
for 8x8
– 32x32 versions;
- +15V, max. 4A / -15V, max 2.5A. Maximum 90W for
64x64 versions.
DC connector: DE9, D-sub 9-pin male.
Status monitoring: Via LED in front of the router/CP.
Safety standards: Compliant with CE EN60950, UL-1950/CSA22.2.
2.3 Control
Standard Features:
Serial port: RS-232 for protocol conversion, to VikinX compact control
protocol, or to third party protocols.
Connector: DE9, D-sub 9-pin female.
NCB ports: For integration with VikinX compact router configuration.
Connectors (2): RJ45 (1 In / 1 Out)
Ethernet port: 10/100BaseT Ethernet bus for external router control.
Connector: RJ45.
Synchronization: - Analog Black&Burst, looped. Both PAL and NTSC
supported.
- Tri-Level, Looped. For HD signal formats only.
- Distribution of synchronization signals between
several routers.
Connector(s): BNC.
Optional Features:
Control Panel:
- Optional, built-in control panel available.
- External control panels available.
2.4 SD-SDI specifications
Supported formats:
Broadcast:
143Mbps – 540Mbps.
Supported standards:
SD-SDI, 270Mbps:
SMPTE 259M.
DVB-ASI: EN50083-9.
Electrical signal inputs:
Connector:
BNC, IEC 61169-8.
Impedance: 75 Ohm.
Return loss: > 15dB (5 MHz – 540 MHz).
Cable equalization,
Reclocking routers: Automatic up to 300m (@ 270Mbps, typical Belden 8281.
Cable equalization,
Non-reclocking routers: Automatic up to 200m (@ 270Mbps, typical Belden 8281.
Electrical signal outputs:
Connector:
BNC, IEC 61169-8.
Impedance: 75 Ohm.
Return loss: > 15dB (5 MHz – 540 MHz).
Signal level: 800mVp-p ±10%.
Rise/fall time: 20% - 80%
SD limit: 0.4ns
– 1.5ns, < 0.5ns rise/fall variation.
Amplitude overshoot: < 10%.
Signal polarity: Non-inverting electrical with respect to inputs.
Signal transition:
Timing jitter:
SD: < 0.2 UI.