6 connecting signal cables to the router, 1 video signals, 2 input extension – Nevion VikinX Sublime Series Rev.AB User Manual
Page 30: 6connecting signal cables to the router
VikinX Sublime 3G/HD/SD-SDI Routers
Rev. AB
nevion.com | 30
6
Connecting signal cables to the router
6.1 Video signals
The Sublime Video Router offers standard 75Ohms BNC connectors for video in- and
outputs. All video inputs are terminated with 75Ohms.
I/O on partly configured routers starts from I/O #1 and up.
6.2 Input extension
This chapter is only applicable for SL-SD1602 (16x2) routers.
This chapter does not apply to partly configured (16x1) routers.
Please refer to Chapter 0 regarding input offset.
SL-SD1602 allows input extension up to 64x2. An extension router is used to collect the
signal from several units. The labels on the rear connectors in question are shown below,
for the purpose of pre-wiring.
Figure 6: Input extension connectors.
Please connect the routers as shown below.
Figure 7: SL-SD3202 wiring diagram.
Figure 8: SL-SD4802 wiring diagram.