Nortec Outdoor Mount Temperature Sensor User Manual

Technical specification, Installation

Advertising
background image

2553860--B| 22 July 2014

Introduction | 1

Outdoor Mount Temperature Sensor Installation Instructions

This document covers the operation and installation instructions for the following Nortec Digital Humidity Controllers:
Part #:

Description:

1510142

0-10V Digital Wall Humidistat

2520259

On/Off Digital Wall Humidistat

2520266

0-10V Digital Duct Humidistat pkg.

2520273

On/Off Digital Duct Humidistat pkg.

2548731

Nortec Digital Wall ON/OFF Humidistat pkg.

2548732

Nortec Digital Duct ON/OFF Humidistat pkg.

Installation

Outside air probes must be installed on a flat vertical surface protected from direct sunlight and rain.

The cable gland must face downwards.

To install the sensor, remove cover

Place seal and washer below the long mounting screw. Securely fix it to wall.

Thread wires through cable gland or conduit connector

Connect the wires, normally 18ga unshielded twisted pair, according to the wiring diagram to the measuring circuit in the cover:

Tighten cable gland

Assemble the cover with the base plate. Make sure the seal in the seal grove of the cover is not damaged and in place.

Tighten the four screws of the cover with moderate torque to complete the installation.

Technical Specification

Sensing Probe

Thermistor:

Accuracy: -40…0°C (-40…32°F):

0…50°C (32…122°F):

50…100°C (122…212°F):

NTC
0.5 C
0.2 C
0.5 C

Connection

Terminal Connectors

For wire AWG 24…12

Environment

Operation

Temperature
Humidity

To IEC 721-3-3
-40…100°C (-40…212°F)
<95% R.H. non-condensing

Standards

conform according to

EMC Standard 89/336/EEC
EMEI Standard 73/23/EEC


EN 61 000-6-1/ EN 61 000-6-3

Product standards

Automatic electrical controls for household
and similar use
Special requirement on temperature
dependent controls


EN 60 730 –1

EN 60 730 – 2 - 9

Degree of Protection

IP65 to EN 60 529

Safety Class

III (IEC 60536)

Housing

Material

Fire proof PC + ABS plastic

Dimensions

Cover: (H x W x D)

33 x 60 x 50 mm (1.3 x 2.4 x 2 in)

Weight (including package)

80 g (2.8 oz)

50 (2)

60 (2.4)

33

(

1.

3

)

Figure 1: Dimensions

Advertising