Ohio Steel 3048HKD 12 Cu Ft Steel Dump Cart - Manual (Page 2)

5
7
8
33
Hitch
Pin
Hair Pin
3
4
4
TOOLS REQUIRED
Large blade screwdriver.
1/2" wrench and/or socket.
Pliers.
Do not carry passengers in cart. •
Do not tow cart on public roads. •
Never exceed LOAD CAPACITY of 1000lbs. •
Avoid sudden turns or maneuvers. •
When operating on slopes, use lowest •
ground speed and limit load to 200lbs.
Operate up and down slopes, never •
across the face.
SAFETY INSTRUCTION
Check tire pressure regularly, 30psi. •
Periodically check all bolts. •
Keep cart clean to prevent rust. •
Store inside a clean dry area. •
MAINTENANCE
9
11
12
17 21
Axle Spacer
Axle Spacer
Axle Washer
Axle Washer
Axle
Washer
Hair Pin
Axle Washer
Hair Pin
Step 5. Attach rear support bar and gate retainers.
Insert tail gate and tighten bolts.
Insert hitch pin and secure with hairpin cotter.
Step 4. Center axle through axle holder & drawbar.
Place washer, spacer, wheel, washer onto axle.
Lock in place with hair pin cotter.
Step3. Loosely attach front gate and corners.
Square assembly and tighten all bolts.
Step2. Loosely attach front support and
axle holder.
Step1. Loosely assemble body halves
as shown.
1
2
REF. NO. QTY. DESCRIPTION
1 1 Body half - Right
2 1 Body half - Left
3 1 Front gate
4 2 Corner
5 1 Rear support bar
7 1 Tail gate retainer - Right
8 1 Tail gate retainer - Left
9 1 Front support
11 1 Axle holder
12 1 Drawbar assembly
17 1 Axle
21 2 Wheel
33 1 Tail gate
34 1 Assembly manual
BB 1 Hardware bag
CARTON CONTENTS