Onwa Marine Electronics KP-823MKII - Manual (Page 12)

Delete the waypoint with the main menu
Press the MENU key twice to enter the main menu, move the cursor to the
"Point" , then move the cursor to "the waypoint required to be deleted", press
the MENU key, and the menu window pops up. Move the cursor to the "Delete"
column, and press the ENT key
Delete all the waypoints with the main menu
Press the MENU key twice to enter the main menu, move the cursor to the
"Point" column , press the MENU key and move the cursor to " ",
press the ENT key , and then move the cursor to the "OK", press the ENT
key to delete all the waypoints.
to confirm.
Delete All
10
Then move the cursor to "OK" column, and press the ENT key to complete
the establishment of a new waypoint. See Figure 13 Position storage and the estab-
lishment of a new waypoint.
After press
the ENT key on
Establish a new waypoint by ship's position: get satellite fix, and
hold either Plotter screen, Navigation screen or Positioning
screen until a beep sound is heard. A new waypoint is established according to the
current ship's position.
2.2.3. Delete the waypoint
Press the MODE key to enter the Plotter screen, and move the cursor to the
waypoint required to be removed, then press the ENT key, it appears "Edit Way-
point screen". Move the cursor to "delete", press the ENT key to delete the way-
point. See Figure 14.
Figure 14
Figure 15
Figure 13