OpenEye CA-501J PTZ - Manual (Page 36)

22 28563AA
DOME CAMERA CONTROL MODE
Function Operation Description
Dome Selection CAMERA + <1> ~ <223> Press number keys to select a dome camera to control.
Pan/Tilt Joystick Right/Left for PAN, Up/Down for Tilt
Lens Control <Zoom -> Zoom Out
<Zoom +> Zoom In
<Focus +> Focus Near
<Focus -> Focus Far
<AUTO FOCUS> Toggles Auto-Focus On/Off
<Brightness +> Brightness Up
<Brightness -> Brightness Down
Set Preset <1> ~ <128> + <SET PRESET> Record preset points
Call Preset <1> ~ <128> + <GO PRESET> Recall preset points
Set Tour <1> ~ <8> + <SET TOUR> Record tour lines
Call Tour <1> ~ <8> + <RUN TOUR> Execute Tour
Build and Run Auto-scan <AUTO SCAN> Record and execute the Auto-scan line
Build and Run Pattern <PATTERN> Build and execute the pattern path
OSD Open <MENU> Press this button for 3 seconds to open the camera OSD
menu.