Title display, Title setting, Setting a camera title – OpenEye CM-511 User Manual
Page 33
29246AC
33
TITLE DISPLAY
Users are allowed to name a view area, where the title will be displayed on screen for easy recognition.
On
Select <ON> to display the title set for a view area on screen while the camera shooting the view area.
Off
When TITLE DISPLAY is set <OFF>, no title will be displayed on screen -- even titles that have been set
previously.
TITLE SETTING
Up to 16 zone titles can be set with maximum 20 characters for each title. Each view area’s title can be named
with a privacy mask ID number for future recognition.
Note
The available area for setting a privacy mask is restricted within tilt angle 45
°.
Setting a Camera Title
To set a camera title:
1. Use the keyboard to adjust the dome to a view area where you want to set a title for it.
2. Press <CAMERA MENU> key on the control keyboard and hold for 3 seconds to enter the OSD menu.
3. Press the down direction key to go to the MAIN PAGE 2 and select <TITLE SETTING>.
4. Select a number to represent the view area.
5. Press the CAMERA MENU key (ENTER) to go into the editing page.
6. Choose a character with direction keys and then press the <CAMERA MENU> key (ENTER) to input.
For example: <A> <CAMERA MENU>, <B> <CAMERA MENU>, <C> <CAMERA MENU>
TITLE: ABC
TITLE SETTING: 01
0
1
2
3
4
56
7
8
9
EXIT
A
B
C
D
E
F
G
H
I
J
SAVE
K
L
M
N
O
P
Q
R
S
T
LEFT
U
V
W X
Y
Z
:
/
.
,
RIGHT
[
]
+
?
-
DELETE
TITLE:
ABC