OpenEye CM-410 - Manual (Page 11)

28561AA 1
INTRODUCTION
FEATURES
CAMERA SPECIFICATIONS
• CCD Sensor : 1/4" Interline Transfer CCD
• Zoom Magnification : × 10 Optical Zoom, × 10 Digital Zoom (Max × 100 Zoom)
• Day & Night Function
• Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus.
• Independent & Simultaneous Camera Characteristic Setup in Preset operation
ADVANCED PAN/TILT FUNCTIONS
• Max. 360°/sec high speed Pan/Tilt Motion
• Using Vector Drive Technology, Pan/Tilt motions are accomplished with the shortest path. As a result, time to target view is
reduced dramatically and the video stream transfers are natural to watch.
• For jog operation using a controller, an ultra slow speed of 0.05°/sec can be reached, making it very easy to relocate camera to
the desired target view. Additionally, it is easy to move the camera to a desired position with zoom-proportional PanTtilt
movement.
PRESET, PATTERN, SWING, GROUP, AND PRIVACY MASK
• Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure,
Label and so on. (Max. 127)
• Swing Action enables camera to move automatically between two preset positions at a designated speed. ( Max. 8 set of Swing
actions can be stored)
• Patterns can be recorded and played back. This enables camera to automatically follow any trajectory preset by joystick as
closely as possible. (Max. 4)
• Group Action enables camera to move automatically with a combination of Preset or Pattern or Swing. A Group is composed of
max. 20 entities of Preset/Pattern/Swings. (Max. 8 set of Group action can be stored)
• Privacy Masks are assignable, so as not to intrude on other’s privacy. (4 Privacy Zones)
PTZ (PAN/TILT/ZOOM) CONTROL
• With RS-485 communication, a maximum of 255 cameras can be controlled at the same time.
• Pelco-D or Pelco-P protocol can be selected as a control protocol in the current firmware version.
OSD (ON-SCREEN DISPLAY)
• OSD menu is provided to display the status of camera and to configure the functions interactively.
• The information such as Camera ID, Pan/Tilt Angle, Alarm Input and Preset can be displayed on screen.