Orion System OE361-13 CommLink 5 - Manual (Page 2)

Form: ORION-OE366-USB-Link-2-01A.doc
Page 1 of 1
Description
The OE366 USB-Link 2 allows computer access
into the Orion controls system and also provides
communications across multiple local communica-
tions loops on the control system when a
CommLink Communications Interface is installed
on the system.
The USB-Link 2 provides a direct link to enable the
system operator to view the status and to configure
and adjust the setpoints of any controller on the
control system communications loop using the
Prism II computer front end software.
The USB-Link 2 is small in size and is powered by
the USB port of the computer it is plugged into,
making it completely portable and allowing connec-
tion to the system from any controller.
The USB-Link 2 is supplied with a USB cable, a
mini- DIN male communication cable, and two
mini-DIN to terminal adapters. The communication
cable allows the user to walk up to any controller
that has a communication socket and plug in the
USB-Link to gain access to the system. The
adapters are used for boards that do not have a
female mini-DIN plug connection.
To use the USB-Link 2, you will need a computer
with an available USB 1.1 or 2.0 port with the in-
cluded USB drivers installed. You will also need
the Prism II computer front end software installed
on the computer.
CAUTION: The USB-Link 2 does not work with
Prism I software. It only works with Prism II.
Female 6 Pin
Mini-DIN
Connector
Female Type B
USB Connector
LED - Typical
Configuration
Switch
Top End View of USB-Link 2
Front View of USB-Link 2
Bottom End View of USB-Link
STAND ALONE
NETWORK
3.63”
2.31”
1.
0
6
”
Communication
Speed Switch
OE366 USB-Link 2
Technical Data OE366 USB-Link 2
Operating Temperature 10
F to 140F Cabling Included (1) 6 Ft. Long USB Cable and
(1) 7 Ft. Long Communications Cable
Operating Humidity 90% RH Non-Condensing Communications RS-485 – 9600 to 115,000 Baud
Computer Connection USB Version 1.1 or 2.0 Adapters Included PL1019054 and PL101905 Mini-DIN
Plug Adapters
Three Year Warranty WattMaster reserves the right to change specifications without notice