Pacific Cycles IF REACH DC - Manual (Page 2)

2
IF Reach DC User Manual
Bike and parts description
1
、 Power/Mode Switch:
The power and mode
switch is on left-hand
side of the handle bar
for easy operation.
When the power is
ON, there are three
different mode of
power for selection.
2
、 Battery Lock: To fix
and secure the
battery pack. Do not
leave the key on the
keyhole while riding.
3 、 Battery Pack:
Removable battery
pack allows user to
recharge at different
locations or replace
secondary back-up
battery.
4 、 Motor System: The
motor, controller and
pedal sensor is all
sealed in the same
unit.
5 、 Speed Sensor:
The speed sensor
measures the rpm of
the rear wheel. The
controller cuts off the
power when the
speed reaches 25
km/hr.
Switch operation
Press the yellow button to turn on and off the power. When power
is on the motor is in standby mode, you will see the orange
indicator light on. Press the yellow button again to turn off the
power. When battery status is low the red indicator starts blinking.
The mode indicator operates in 3 ways: Economy mode is the
default setting every time when you turn on the power (green
indicator off ); Standard mode (green indicator on); and Turbo
mode (green indicator blinking).