Desa HD-9140 - Manual (Page 7)

-7- 595-5660-06
Finish Mounting
❒
Align the fixture base plate, gasket, and the
junction box holes. Secure with mounting
screws that fit your junction box.
❒
If not installed on a weatherproof box or if an
adaptor plate was used, caulk between the
base plate and mounting surface with sili-
cone weather sealant.
To avoid water damage
and electrical shock, keep
lamp holders aimed below
horizontal.
Specifications
Range . . . . . . . . . . . . . . Up to 100 feet (30.5 m) with
Range Boost On; up to 70
feet (21 m) with Range Boost
Off. (Varies with surround-
ing temperature).
Sensing Angle . . . . . . . Up to 270 °
Sensor Load Capacity . Up to 1000 Watts (8.3 amps)
Maximum, Incandescent
Power Requirements . . 120 VAC, 60 Hz
Operating Modes . . . . . TEST, AUTO and
MANUAL OVERRIDE
Time Delay . . . . . . . . . . 1 , 5, 20 minutes
Sensitivity . . . . . . . . . . . Adjustable