QuickLabel RW-P8 - Manual

THREE-YEAR LIMITED WARRANTY
Your new RW-P2 or RW-P8 Label Rewinder (the Unit) is guaranteed to the original
end-user purchaser to be free from defects in materials and workmanship under
normal use for a period of three (3) years from original date of purchase. (The AC
power supply warranty period is one 1 year.) This Warranty begins when you
purchase the Unit and continues for the Warranty period unless you sell or rent the
Unit, in which case the Warranty terminates.
In the event Warranty service is required, please contact QuickLabel Systems for
a Return Material Authorization (RMA) number and the location to which the Unit
should be shipped. The Unit must be packed securely for shipment to avoid
damage. Original packaging is recommended if available. Proof of original
purchase must accompany the Unit. The customer assumes all costs incurred in
transporting the Unit to an authorized service center. Upon examination, if the
Unit is found to be defective, it will be repaired or replaced without charge during
the Warranty period.
QuickLabel Systems disclaims any implied warranty, including the warranty of
merchantability and the warranty of fitness for any particular purpose, and as-
sume no responsibility or liability for any special, incidental or consequential
damages.
This Warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, connection to inappropriate power source, lack
of reasonable care, unauthorized modification, the affixing of any attachment not
provided by QuickLabel Systems, or loss of parts. This Warranty is voided in the
event any unauthorized person opens, alters, or attempts to repair the Unit.
QuickLabel Systems
A Product Group of Astro-Med, Inc.
World Headquarters:
600 East Greenwich Avenue
West Warwick, RI 02893
Telephone:
401-828-4000
Toll Free: 877-757-7978
Fax: 401-822-2430
www.QuickLabel.com
E-mail: [email protected]
QLSRW-P8 Operations Manual.p65
Rev. March 2005
RW-P8 (10” width) Label Rewinder
Constant Adjustable Torque tm (“CAT”) technology ensures silent operation and
constant, uniform tension on the label takeup reel without dancer or tensioning arms.
The result is a short leader length, exceptionally easy threading, and no speed
adjustments or troublesome clutches, belts, or gears. Dual torque ranges and a
Torque Control Knob set the desired tension on the RW-P Series Rewinders. The
RW-P8 Rewinder can also be used as a Label Unwinder.
Rugged, heavy-duty steel construction allows the unit to be conveniently set in place
near the label printer. Special anti-slip feet on the base prevent the unit from moving.
This reliable, high-quality, maintenance-free unit features a Limited 3 Year Materials
and Workmanship Warranty (see warranty statement for details).
UNPACKING
Remove all parts from the shipping container and verify the contents:
___
RW-P8 Drive Unit
___ Universal 100 - 240VAC 50-60Hz Power Supply
___ AC Line Cord
___ Rewind Shaft with small Allen head set screw (installed)
___ PLastic Flange Plate (2 each)
___ Metal Fins (6 each)
___ User Manual, 2 Allen Wrenches, #8 Screws & Washers (24 each)
SETUP
WARNING! THIS EQUIPMENT IS FOR
INDOOR USE ONLY.
NOT FOR USE IN WET LOCATIONS.
(1) Identify the Inner Flange Plate as the plastic disc with a center Nylon Hub
containing an Allen head screw. Using the larger Allen wrench, attach the Inner
Flange to the Rewind Shaft.
(2) Slide the Rewind Shaft and Flange Plate assembly onto the Motor Shaft allowing
for clearance to the Chassis and Motor Screws. Align the Set Screw with the flat on
the Motor Shaft. Tighen the Allen screw to secure the Rewind Shaft.
(3) The Metal Fins on the Rewind Shaft hold the Rewind Core. Supplied Washers
can be used under one or more of the fins if the core does not hold securely.