Randall Amplifiers NB KING100 - Manual (Page 4)

FRONT PANEL FEATURES-
cont
SOLO
Voiced like the Overdrive mode, the Solo mode provides an addition option
for more or less Drive & Level in the Overdrive channel. Most players will
use the Solo mode for a lead or volume boost to the normal Overdrive channel.
LEVEL - Controls the output level of the Solo Overdrive channel. Use this knob to
achieve addti desired volume level for the Overdrive channel.
DRIVE - Controls the distortion level in the Overdrive channel. This amp was designed
to achieve a wide-range of gain levels, so set the control lower for more mid-gain classic
rock and funk tones or turned it up for full on modern rock and metal distortion.
VU METER
The VU meter measures the overall output of the amp. You will notice the VU Meter
is slighter higher when using the Clean channel, because the signal level is much cleaner
and stronger in this channel. Don’t be concerned if the VU meter hits the red area
occasionally, this just means you’re
.