Dynacord DPA 4120 User Manual

Page 23

Advertising
background image

POWER AMPLIFIER DPA 4120 / DPA 4140

OWNER'S MANUAL

400 WATT S POWER AMPLIFIER

PROTECT

STANDBY

TEST

DPA 4140

GROUND

FAULT

CLIP

0dB

-13dB

READY

Performance Features

Power amplifier with 200 W or 400 W output power according to the IEC 283-3 standard within a
19“ - cabinet (3 HU) providing the following functions:

x supported are 115/230V AC mains as well as 24V DC emergency power source
x power amplifiers DPA 4120 providing 200 W or DPA 4140 providing 400 W output power, idling and short-circuit

protection

x output transformer for balanced, floating 100 V speaker networks of optionally 70 V, 50 V or

4 ohms for low-impedance operation

x optional input modules:

standard operation INPUT MODULE with level control, electronically balanced input and MONITOR output with
optional transformer or

REMOTE MODULE for controlling and monitoring the PROMATRIX system, electronic level controls,
electronically balanced input and MONITOR output with optional transformer

x integrated stand-by power supply
x mains POWER ON/OFF switch
x ground lift switch
x remotely controllable mains and battery operation with initial current inrush limiter
x power-on switching noise suppression
x status-LED indicators for operation (READY), STANDBY, thermal overload (PROTECT) and

occurrence of GROUND FAULT conditions at the power output

x fault message according to the IEC 849 standard
x TEST button to switch between system and average operation, respectively a RESET button to restart after the

occurrence of ground fault conditions

x LED level meter instrument with a display range of -13 dB to 0 dB and CLIP
x integrated relays for single call and obligatory reception
x active, temperature controlled ventilation
x pilot tone and ground fault surveillance module according to the DIN/VDE 0800 standard (optional)

The extension-kit NRS 90208 (input transformer) has been integrated in the input module NRS 90222
starting with the serial number 10461 and in the input module NRS 90225 starting with the serial number
12339 and higher.

23

Advertising
This manual is related to the following products: