Remotec ZXT-310 V1.2 - Manual (Page 17)

17
Z­Wave Configuration Parameters
Parameter
Number
Definitions
Size
(Byte)
Parameter Value
1—20
(0x01—
0x14)
UIRD formatted raw data
for the Simple AV
command number or key
being downloaded or
uploaded
4 Depends on IR
code data
(Depend on UIRD
data)
21
(0x15)
The Simple AV command
number or key going to be
downloaded to the ZXT‐
310
2 Referred to
Simple AV
command class
key ID
(Default : 0x0000
No simple AV ID is
selected)
22
(0x16)
Download status register
(Read only)
* The status value 1, 3, 4
will be reset to 0 when
ZXT‐310 receive a get
command to this
parameter
1 0 (0x00): IR
channel idle
1 (0x01): OK
2 (0x02):
Downloading
3 (0x03):
Command Full
4 (0x04):
Operation Fail
(Default: idle,
0x00)
23 to 24
(0x17 to
0x18)
Reserved (For internal
reference only) ‐ N/A
25
(0x19)
The Simple AV command
number or key going to be
learned
* Any incoming operation
may probably to wait up to
15s to release until the
internal process of
parameter 0x19 has
finished.
2 Referred to
Simple AV
command class
key ID
26
(0x1A)
Learning status register
(Read only)
* The status value 1, 3, 4
will be reset to 0 when 1 0x00: IR channel
idle (default)
1 (0x01): OK
2 (0x02): Learning
3 (0x03):