Research Concepts RC2000C User Manual
Research Concepts Accessories communication
Advertising
Table of contents
Document Outline
- TABLE OF CONTENTS
- Chapter 1 INTRODUCTION
- Chapter 2 BASIC FUNCTION DESCRIPTION
- Chapter 3 INSTALLATION/SETUP
- 3.1Before You Begin
- 3.2Mechanical and Electrical Installation
- 3.3Optional Polarization Control
- 3.4Setting Azimuth and Elevation Limits
- 3.5Slow Speed Adjustment
- 3.6Programming Geostationary Satellites
- 3.7Angle Display of Az/El Position Data
- 3.8AutoPol
- 3.9Simultaneous Azimuth and Elevation Movement
- 3.10Installation and Setup Checklist
- Chapter 4 INCLINED ORBIT SATELLITES
- 4.1Geostationary and Inclined Orbit Satellites
- 4.2RC2000C Tracking Algorithm
- 4.3Implementing the Tracking Algorithms
- 4.4Configuring the Tracking System
- 4.5Inclined Orbit Satellite Setup Checklist
- Chapter 5 MODES IN-DEPTH FUNCTION DESCRIPTION
- 5.1MANUAL Mode
- 5.2AUTO Mode
- 5.3REMOTE Mode
- 5.4TRACK Mode
- 5.5LIMITS Mode
- 5.6SETUP Mode
- 5.7RESET Mode
- 5.8DELETE Mode
- 5.9RE-SYNC Mode
- 5.10CONFIG Mode
- 5.10.1 AutoPol
- 5.10.2 Simultaneous Azimuth and Elevation Movement
- 5.10.3 Remote Communication Parameters
- 5.10.4 Azimuth and Elevation Slow Speed Codes
- 5.10.5 Azimuth and Elevation Angle Display
- 5.10.6 Polarization Motor Option
- 5.10.7 Azimuth and Elevation Drive Options
- 5.10.8 Time and Date Settings
- 5.10.9 Signal Strength Parameters
- 5.10.10 Antenna Parameters
- 5.10.11 Track Mode Parameters
- 5.10.12 Expert Access Flag
- 5.10.13 Reset System Data
- Chapter 6 SPECIFICATIONS
- Chapter 7 TROUBLESHOOTING/ALARM CODES
- APPENDICES
- Appendix A1 - Restoring Non-Volatile Memory
- Appendix A2 - Recovering From Unexpected Memory Upsets
- Appendix B - Expert Access / Reset System Data Code
- Appendix C - RS-422 Serial Interface
- Appendix D - The RCI RS422 Interface Specification
- Appendix E - RC2000C Communications Protocol
- Appendix F - Controlling Antennas Powered by AC or Large DC Motors
- Appendix G - Procedure for Determining Satellite Inclination
- Appendix H – Schematics & PCB Layouts
- WARRANTY