RGBLink New Driver Quick Start - Manual (Page 12)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
11
After setting, push MENU to return the previous menu, choose [CONNECT CARD TYPE] according to
actual connection mode. New Driver support 8 kinds of connection modes, they are , , ,
, , , and respectively.
Send to receiver after choose the connection mode, observe the display screen and make sure if
display image is correct. If wrong, change the connection modes. Then connect the Port D or Port U of
One Sending Card to LED Screen is finished.
(8) The setting for port D is same as the above setting.
Rendering is as follows:
HEIGHT 120
D PORT Offect (A/B) X 0
D PORT Offect (A/B) Y 0
> CONNECT CARD TYPE >>