RGBLink MSP 214 User Manual - Manual (Page 22)

2. Hardware Orientation
MSP 214 DVI to Fiber Panel
MSP 214 User Manual 22
MSP 214 DVI to Fiber Panel
The figure below illustrates the professional interface and control signals
of MSP 214 DVI to Fiber panel:
1: DVI Input
DVI input interface: Input the video signal from computer, DVI signal
generator. Connect to the same DVI interface on MSP 214. （ This
Connection does not support hot-plugging）
Note
2: Signal Indicator
When input DVI signal, the signal indicator lights.
1: Power Interface
The device uses the standard 12V/3A power supply.
3: Fiber Output
Used to connect fiber cable, the device uses single mode twin-core fiber
or multimode twin-core fiber, LC interface.
DVI is compatible with HDMI.