Msp 214 fiber to dvi panel, Power interface, Fiber input – RGBLink MSP 214 User Manual User Manual
Page 24: Indicator, Dvi output, Signal indicator, Hardware orientation
2. Hardware Orientation
MSP 214 Fiber to DVI Panel
MSP 214 User Manual 24
The figure below illustrates the professional interface and control signals of
MSP 214 Fiber to DVI panel:
1: Power Interface
The device uses the standard 12V/3A power supply.
3: Fiber Input
Used to connect fiber cable, the device uses single mode twin-core fiber or
multimode twin-core fiber, LC interface.
2.4: Indicator
Power indicator 2 lights when device has power supply.
LED indicator 4 is off when connect fiber cable and the device is in normal
operation.
1: DVI Output
Connect to the monitor or LED screen which has DVI interface
(This DVI connector does not support hot-plugging).
2: Signal Indicator
When output DVI signal, the signal indicator lights.