RGBLink VSP 737 User Manual - Manual (Page 74)

5. System setting and operation
How to use blending function
VSP 737 User Manual 74
How to Use Blending Function
Firstly assure the device is powered on. Details are in: How to Confirm the
Device is in Normal Operation.
Introduction: Blending makes overlaying transition soft;
Operations are as below：
1. Select the layer to be edited.
2. Tap Blending;
3. Rotate the knob, adjust blending width value (0~255), the larger the
value, the more the blended edge, and the smaller the value, the less
the blended edge. LCD screen shows as below：
Reference picture:
BLENDING: ON
>WIDTH: 32