Denon RCD-M37 - Manual (Page 16)


ENGLISH
Get
ting Star
ted
Connections
Set
ting the
Timer
Other F
unctions
Tr
oubleshooting
Specifications
<1/3> <5>
ON/STANDBY <VOLUME> <PHONES> SOURCE
MENU/SET
SDB/TONE 8 , 9
ON/STANDBY
[MUTE]
[o p]
[ENTER/MEMO]
8 , 9
[VOLUME df ]
MENU/SET
SDB/TONE
[CLOCK]
SOURCE
[DIMMER]
[CD 1/3]
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
G ExampleH Setting the current time to 10:15 am
1 Press ON/STANDBY to turn the power on.
2
Press [CLOCK] .
The current time is displayed.
3 Press MENU/SET for over 1 second to set the manual
time setting mode.
The “hours” display flashes.
4 Use 8 , 9 or [o p ] to set the “hours”.
5 Press MENU/SET or [ENTER/MEMO] .
The “minutes” display flashes.
6 Use 8 , 9 or [o p ] to set the “minutes”.
7 Press MENU/SET or [ENTER/MEMO] .
The current time is set, and the normal display reappears.
TIME Adj AM12:00 TIME Adj AM12:00
TIME Adj AM10:00 TIME Adj AM10:00
TIME Adj AM10:00 TIME Adj AM10:00
TIME Adj AM10:15 TIME Adj AM10:15
n Checking the current time when the power is on
Press [CLOCK] .
When pressed again or if a different operation is performed, the
normal display reappears.
n Checking the current time when the power is set
to standby
Press MENU/SET or [CLOCK] .
Press again to turn off display.
• Displaying the time when the power is set to standby consumes
electricity. To reduce electric consumption, turn the time display off.
• When the function is set to iPod, the current time cannot be set.
Set
up
Pla
ybac
k
Setup
Setting the Current Time
(12-Hour Display)