Denon RCD-M37 - Manual (Page 37)

Specifications
ENGLISH
3
Get
ting Star
ted
Remo
ving the Speak
er Net
Connections
Removing the Speaker Net
CAUTION
• Be sure to turn the amplifier’s power off before connecting the
speakers to the amplifier.
• If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure to
connect the polarities properly.
Connections
When connecting, be sure to read the amplifier’s owner’s manual
carefully and connect properly.
• Connect the input terminals on the rear panel of the speaker with the
speaker output terminals on the amplifier, using the speaker cables
(Supplied).
• Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on the
amplifier, making sure to check the polarities (“+” and “–”).
• There are various types of speaker output terminals on amplifiers.
Check your amplifier’s owner’s manual.
Connections
Once connections are completed, pull gently on the speaker cables to
check that they are securely connected.
CAUTION
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
1
 Twist firmly the wires by hand so
thattheydonotstickoutandcause
short-circuits.
2
Loosentheterminalbyturningtotheleftandinsert
the speaker cable through the hole in the speaker
terminal.
3
Tightentheterminalbyturningtotherightandcheck
thatthecorewireisnotprotrudingfromthehole.
Connect to amplifier’s
“+”side: Plain core
Connect to amplifier’s
“–” side: Striped core
“–” side
terminal: Black
“+” side terminal: Red
Use the included speaker cable to connect the input terminals on the
back of the speakers to the amplifier’s speaker output terminals.
• The net on the front of the speakers can be removed.
• To remove, grasp both sides of the net and pull forward.
• To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.
Sheath