Sierra Video FRS-181 - Manual (Page 16)

Page 16 of 27 FRS-181 Owner’s Manual
• (V 2.1)
Negative Watts Consumed
A read only indication of power consumed by the card from the frames +-7.5V rail.
Software Release Number
A read only indication of the software release number. A higher number is newer release of software.
Software Build Number
A read only indication of the software build number. Software build number is an internal indicator
used by Sierra engineers to differentiate different software builds.
Factory Default Settings
The factory default settings are as follows
1) The proc module has all parameters set to unity.
2) Embedded audio inputs are mapped to corresponding embedded audio outputs.
3) Audio gain is set to 0dB and polarity is set to normal on all channels.
4) The Frame Sync is disabled, reference 1, 2, or input must be chosen to enable the frame sync.