Sierra Video UPC-166 - Manual (Page 57)

Operating Instructions
Accessing the UPC-166 Card via Remote
Control
Accessing the UPC-166 Card Using a Cobalt ® Remote Control
Panel
Press the Select Device key and select a card as shown in the example below.
This display shows the list
is displayed with a reversed background (in this example,
is ready for selection
3-13 UPC-166-OM
(V4.0)
3366_3392.JPG
This display shows the devices assigned to the Control Panel.
order number of the device that
• Rotate any knob to select from the list of devices. The device selected using a knob
―1 9066 - Receiver 21 Input Processing).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
Card Access/Navigation Card Info Card Function Submenu
Tree Pane Pane and Controls Pane
UPC-166_DB_ACCESS_V4.PNG