Smithco Envizio Pro Quick Reference Guide - Manual (Page 14)

1 3
Operation
If the Use Zone Map option has been enabled for the active job (see the Start a
Job section), the Menu will contain tools for recording AccuBoom Zone Map
features.
To Load a Zone Map with a Job in Progress:
1. Begin an AccuBoom enabled job with the Use Zone Map option selected (refer
to the Start a Job section earlier in this guide).
2. Touch:
3. Select the name of the desired Zone Map from the list and touch to load
the map.
To Edit the Zone Map:
1. Begin an AccuBoom enabled job with the Use Zone Map option selected (refer
to the Start a Job section earlier in this guide).
2. Touch:
3. Select the following icons to begin recording a:
4. Select the reference point of the vehicle and then touch the icon.
5. The Guidance screen will re-appear and the field computer will begin recording
the boundary or feature. On the Guidance screen, a Pause and End icon
appear for the feature currently being recorded.
The Guidance screen will also display a reminder above the Menu icon when
the field computer is in Spray Zone Edit mode. The Menu contains the tools for
editing Spray Zones when this reminder appears. To exit the edit mode, touch
the
icon within the Menu.
Zone Tools
Load Spray
Zone Map
Menu
Zone Tools Menu
Field
Boundary
Spray
Zone
No-Spray
Zone
Recorded
Path Pause and
End Icons
AccuBoom
Override