Smithco Envizio Pro Quick Reference Guide - Manual (Page 5)

4
System
Access the System menu to set up the product control system, or configure the
optional AccuBoom, AutoBoom or SmarTrax systems. The System menu also
contains the setup screens for the optional TM-1 Tilt Module and the on-screen or
external light bar.
To Retry the CANbus Connection:
If the field computer does not recognize CAN nodes when the computer is first
powered up, the CANbus connection may need to be restarted.
1. From the Home screen, touch
2. When prompted, touch the to confirm and retry CANbus communication.
If CANbus communication is not re-established, refer to the Envizio Pro and
Envizio Pro II Installation and Operation Manual for troubleshooting information
and assistance.
Vehicle
Access the Vehicle menu to set up or modify vehicle profiles for each machine or
implement with which the field computer will be used. Profiles allow the operator
to set up GPS antenna heights and offsets as well as the swath width and section
setup for each implement and transfer those settings to a home or office PC,
another Envizio Pro or Envizio Pro II, or reload the Profile at a later date.
To Edit Profiles:
1. From the Home screen, touch:
2. The Profile Manager screen displays with the currently loaded profile
highlighted in the list of profiles stored on the field computer.
To Create a New Profile:
Touch the icon and use the
on-screen keyboard to enter the
desired profile name.
To Save a Profile:
Touch the desired profile name in
the list and select the Save Profile
button. The current settings will be
saved to the highlighted profile.
To Load a Profile:
Touch the desired profile name in
the list and select the Load Profile
button.
Tools Menu Vehicle Menu Profiles