Smithco Envizio Pro Installation & Operation Manual - Manual (Page 29)

3
Manual No. 016-0171-148 19
Installation
Generation 2 Cable Connections
The chassis cable platform requires the following components:
• Machine specific chassis cable
• Envizio Pro or Envizio Pro II chassis interface cable (P/N 115-0171-926)
• CAN Switch Box kit (P/N 117-5020-001)
Note:
Refer to the Raven CANbus Network Installation Manual for additional cabling information for the
generation 2 cable platform.
FIGURE 6. Generation 2 Cable Connection Diagram
Note:
The CAN Switch Box is not used with the OmniRow system.