Spectec SDV-841/842 - Manual (Page 14)

3. Press the Save icon (floppy disk) next to the configuration/scheme drop
down list.
4. Enter the desired name for the new configuration/scheme. The prompt
will default to the configuration/scheme you selected in Step 2.
5. A confirmation dialog box will appear. Press OK to create the new
configuration/scheme or Cancel to abort the action.
Deleting Configurations and Schemes
You may delete any configuration except for "(Disable Virtual Display)" and
"(Current Configuration)" and "(Standard Configuration)" or any scheme
except for "(Standard Scheme)" and "(Current Scheme)". To delete a
configuration or scheme, follow these steps:
1. Start the Virtual Display Settings Applet .
2. Select the configuration or scheme you wish to delete from the drop
down list.
3. Press the Delete icon (red X) next to the configuration/scheme drop
down list.
4. A confirmation dialog box will appear. Press OK to delete the
configuration/scheme or Cancel to abort the action.
Applying Configurations and Schemes
Once you have defined a configuration or scheme you can change all the
property values at once by selecting the named item.
1. Start the Virtual Display Settings Applet .
2. Select either the Configuration Tab or the Scheme Tab.
3. Select the configuration or scheme you wish to apply from the drop
down lists.
4. Press OK to apply the configuration/scheme and exit.
Setting Miscellaneous Options
In addition to configuration and scheme settings there are a few other options.
1. Start the Virtual Display Settings Applet .