Dish Network Platinum Plus 121150 User Manual

Page 35

Advertising
background image

121150

33

When you
press a button
on the remote
control, the
device doesn’t
do what you
expect.

• Maybe you’re

trying to control a
device and
you’re not
pointing the
remote control
right at it.

• Maybe the

remote control is
missing
batteries, maybe
you put the
batteries in the
remote the
wrong way, or
maybe the
batteries are
weak or dead.

• Maybe you didn’t

set the remote to
the mode for the
device you want
to control.

• Maybe you didn’t

set up the remote
to control the
device.

• UHF signals from

a neighbor’s
remote may be
blocking signals
from your
remote.

• Remember, the remote control uses

IR signals to control all devices
except for the receiver (when using
the UHF antenna). IR signals travel
only 40 feet or less, and can’t go
through walls or other solid objects.
You must point the remote control
right at the device, with no objects to
block the signal path.

• If the batteries are missing or dead,

put fresh AAA-size batteries in. If
the remote has fresh batteries,
check whether you put them in the
right way. If you didn’t, take them
out and put them in the right way.

• Press the correct mode button to set

the remote to the mode for the
device you want
to control.

• Make sure you set up the remote

to control all the devices you want
to use. See Remote Control Setup
on page 6.

• Put a UHF attenuator on the

receiver’s UHF Remote Antenna
input. This will help keep stray
signals from blocking your remote’s
signals, but also cut down how far
away you can use the remote.
Change your receiver’s address
(see Change the Address on
page 9).

When you
press the
remote control
Mute or
Volume
button,
nothing
happens.

• Maybe you have

not set up the
remote control.

• Maybe you’re

trying to control
TV volume but
you set up the
remote
to control a tuner
or amplifier in
AUX mode.

• Maybe you’re

trying to control
tuner or amplifier
volume but you
set up the remote
to control a TV
in AUX mode.

• See Remote Control Setup on

page 6.

• Set up the remote to control either

TV volume or tuner/amplifier
volume, whichever you want.

What’s

Happening

What’s Wrong

What You Can Do

text_dishpvr.fm Page 33 Tuesday, January 28, 2003 8:04 AM

Advertising
This manual is related to the following products: