Sundance SMT6050 - Manual (Page 14)

Version 1.0 Page 14 of 20 SMT6050 User Manual
1- Start Matlab.
2- In the Matlab command window, change the directory to the 370_realtime
directory.
cd C:\ Sundance\demos\370_realtime
Or at the top of the Matlab window there is a tab that says current directory. The
directory can be changed there rather than typing the address each time.
3- Type open demo370dsp.mdl in Matlab command window. The following window
should appear:
Figure 2 Matlab Window
4 - Double click on smt370. The following dialogue box will appear.
Figure 3 Parameters
4- Make sure that the path to pattern File is correct and pattern file is available.
5- From this window menu, select: Simulation-> configuration parameter