Sundance SMT791 - Manual (Page 21)

7.1 Location of SMT391 Test Points
The following figure shows the location of the voltage test points on the SMT391.
Figure 14: Voltage Test Point Locations.
8 Power Supply
The following voltages are required by the SMT391 and must be supplied over the
daughter card power connector.
Voltage
Current
Required
D+3V3_IN 2.0 A
D+5V0_IN 500 mA
D+12V0_IN 250 mA
D-12V0_IN 250 mA
DGND
Figure 15: SMT391 Power Supply Voltages.
The following table lists the internal SMT391 voltages that are derived from the
voltages that are provided over the daughter card power connector.
Voltage Description
D+3V3 Derived from D+3V3_IN
D+2V25
Derived from D+3V3 on
SMT391
User Manual SMT791 Page 21 of 21 Last Edited: 12/10/2010 09:52:00