Sundance SMT8090-365 - Manual (Page 7)

Version 1.2 Page 7 of 12 SMT8090 User Manual
Hardware involved.
The SMT8090_365 is built around two main modules but also involves a carrier
board and some cables to interconnect them and allow them to communicate with
each other and to access the PC.
⇒
1x SMT310Q: PCI carrier
⇒
1x SMT365: Single-C6416 based module; to be plugged on site 1 of
SMT310Q.
⇒
1x SMT390-VP: Dual-ADC module; to be plugged on site 2 of SMT310Q.
⇒
1x FMS cable (20cm): to connect T1C0 to T2C3 at the back of the
SMT310Q.
⇒
1x SMT516 (SHB to SHB PCB): to connect SHBA (SMT365) to SHBA
(SMT390).
⇒
1x SMT511 (SHB to SHB cable): to connect SHBB (SMT365) to SHBB
(SMT390).
⇒
4x MMCX to BNC cables to connect an external analogue signal source to
J1 to J4 and an external clock source (when using external sampling clock) to J5 and
J6.