Sundance SMT8090-374 - Manual (Page 7)

Version 0.9 Page 7 of 12 SMT8090 User Manual
Hardware involved.
The SMT8090_374 is built around two main modules but also involves a carrier
board and some cables to interconnect them and allow them to communicate with
each other and to access the PC.
⇒ 1x SMT310Q: PCI carrier
⇒ 1x SMT374: Dual-C6713 based module; to be plugged on site 1 of
SMT310Q.
⇒ 1x SMT390-VP: Dual-ADC module; to be plugged on site 2 of SMT310Q.
⇒ 1x FMS cable (20cm): to connect T1C0 to T2C3 at the back of the
SMT310Q.
⇒ 1x SMT516 (SHB to SHB PCB): to connect SHBA (SMT374) to SHBA
(SMT390).
⇒ 4x MMCX to BNC cables to connect an external analogue signal source to
J1 to J4 and an external clock source (when using external sampling clock) to J5 and
J6.