Sundance SMT8091 - Manual (Page 12)

b – Then fit four M2 nuts on each screw.
c – Place the SMT338 on the second site (SMT395VP already on first site) on
the SMT310Q and fit two metal pillars (3.3 Volts).
d – Place the SMT391 on top of the SMT338-VP. Make sure that both modules
fit firmly.
e – Fit two M2 nuts on the Nylon screws and two M3x4 screws in the 3.3V
pillars.
3 – Connect Comport 1 of the SMT395VP to Comport 3 of the SMT391 (T1C0 to
T2C3) via an FMS cable at the back of the SMT310Q.
4 – Connect SHBA on the SMT395VP to SHBA on the SMT391-VP via the SMT516
(SHB to SHB PCB).
5 – Connect SHBB on the SMT395VP to SHBB on the SMT391-VP via the SMT511 (SHB
to SHB cable).
User Manual SMT8091 Page 12 of 16 Last Edited: 15/09/2006 11:54:00