Sundance SMT9650 - Manual (Page 12)

Document No.
S M T 9 6 5 0 U s e r G u i d e
Revision
3 . 0
Date
2 9 D e c 2 0 0 6
Page
12 of 36
1.5.2. silo2switch
This is a wrapper for a task with the same name from the SMT6045. It is a task that reads data from a
physical channel and buffers them and allows a slow data sink to work with an SMT364 ADC.
Figure 2: Parameter window for silo2switch task
● Place task on: specify which processor this task should be placed on.
● Task memory size: the amount of memory that will be assigned to this task for stack and heap.
Since this task needs a lot of memory to buffer input data, you need to make sure that enough
memory is assigned to this task.
● Input channel: Physical channel that connects to the ADC board.
● Sample type: this depends on the ADC settings and could be 16-bit integer or 16-bit unsigned
integer.
● Sample per frame: the number of samples in one frame.
● Number of Frames: the number of frames that the task allocates for buffering.