Super Systems X5 - Manual (Page 54)

275.8
A.pas
11
OK
274.8
Menu
AccS
Ac.le
E.AMn
Ac.le
fUll
EHec
none
yes
C.pas
Oper
EHec
C.pas
33
54
4 - Operation
4.6 PARAMETERIZATION - ACCESS MENU - PASSWORD - CALIBRATION
Operator
mode
Access
menu
Enter password
for access enable
Press until
from -999 to 9999
(11 default value from factory)
Access
to all the levels
[1]
Execute
the following
operations
A/M enable
yes / nO
Operator
level Access
Change the
Configuration
password
Enter
the Configuration
password
[1] With the level of access set to full, all
the related parameters are displayed.
Pressing í
go back to the Operator
mode
YES
NO
If the password entered corre-
sponds to the one stored in the
A.pas [ A] parameter, the
access configuration page is
displayed.
X5-SSI-uk 18-03-2009 17:54 Pagina 54