Super Systems SDS 8120 - Manual (Page 93)

Super Systems Inc. Page 93 of 104
Color Touch Screen Data Logger Operations Manual
Removing Data Logger from Box
Carefully remove the data logger and other contents from the box. Place the data logger flat on
the table, and set the box aside. The contents should include items shown in the picture below.
Standard Contents of Box
Warming Up and Charging the Data Logger
If the data logger was recently brought indoors from a cold outside environment, allow the data
logger to warm up to the ambient temperature before plugging it in or turning it on. This will
help prevent condensation from forming on or inside the data logger and will help prevent
damage to electrical parts.
If the data logger has not been charged, first plug it into an electrical outlet using the electrical
cord provided. Allow the unit to charge until the charging light turns from red to green (green is
fully charged).
SDSReporter CD
Calibration Certificate
USB Cable
Power Cord
Color Touch Screen
Data Logger