Swami 4000+ GPS - Manual (Page 7)

6
1.4 Attaching Belt Clip
• Attach black gear shaped piece to the back of the Swami 4000+ using one of the
included screws (other screw is a spare). Do not over tighten or threads will be
stripped and the connection will become loose.
• Once attached, slide black gear shaped piece into the slot on the front of the belt clip
until it clicks and locks into place.
• To remove the Swami 4000+ from the belt clip, push down on the release button
located on the top of the belt clip.
1.5
Charging Instructions
• Insert one end of the USB cable into the connection port under the back rubber cover
on the back of the device. Then insert the other end of the cable into a USB port or
AC adapter (not included).
• The Swami 4000+ needs about 4-5 hours to charge a fully depleted battery.
• The battery can be charged before being completely drained, but please do not
charge it excessively.
• The most efficient charging method is to charge the battery while the device is
powered off.
• While unit is powered off the screen display will show a battery icon with bars
pulsating. When the bars stop pulsating, unit is fully charged.
USB Cable Belt Clip Protective Case
General Description of Hardware