Teac CD-P1260 - Manual (Page 9)

9
ENGLISH
1 5
2
4 3
Press the OPEN/CLOSE button. 2
Place a disc on the tray with the printed label face up. 3
< Never place more than one disc on the tray.
< The disc must be loaded centrally into the disc tray. If the disc
is not correctly loaded, it may not be possible to open the tray
again once it has closed, so you should ensure the disc is
always centrally loaded in the tray.
< Do not force the tray by hand during opening and closing
operations.
Press the OPEN/CLOSE button to close the CD door. 4
< It takes a few seconds for the unit to load the disc. No
buttons will work during loading. Wait until the total number
of the tracks and the total play time of the disc are displayed.
< When no disc is loaded in the CD player, “NO DISC” is
displayed.
Press the Play/Pause button (y/J) to start playback. 5
Playback starts from the first track of the disc.
< MP3 tracks recorded out of folders are automatically put in
the “ROOT” folder,.and playback starts from the first track of
the ROOT folder.
< When the playback of all the tracks has finished, the unit
stops automatically.
When a MP3 disc is loaded
total playing time total tracks
total number of folders
When a CD is loaded
total tracks
Press the POWER switch to turn the unit on. 1
Listening to CD/MP3 (1)