Teac K-01X - Manual (Page 22)

22
IMPORTANT NOTICE
You must install dedicated driver software before connecting this
unit with a computer.
If you connect this unit with a computer before installing the driver, it
will not function properly.
For details about driver installation, see the instructions on the
Esoteric download page.
Depending on the computer hardware and software integration,
proper operation might not be possible even with the above operat-
ing systems.
Note about transmission modes
This unit connects using HIGH SPEED asynchronous mode.
The sampling frequencies that can be transmitted are 44.1, 48, 88.2,
96, 176.4, 192, 352.8 and 384 kHz. 2.8 MHz and 5.6 MHz DSD are also
supported.
If the proper connection has been made, you should be able to
select “ESOTERIC USB AUDIO DEVICE” as the computer's audio output.
In asynchronous mode, the audio data sent from the computer will
be processed using this unit's clock, enabling the amount of jitter
that occurs during data transmission to be reduced.
Connecting a computer and playing back audio files
Installing the driver
With Mac OS X
The driver works with the following versions (as of June 2014).
OS X Lion 10.7
OS X Mountain Lion 10.8
OS X Mavericks 10.9
o This unit can be operated with the standard OS driver, so there is
no need to install a driver.
With Windows
The driver works with the following versions (as of June 2014).
Windows Vista 32/64-bit
Windows 7 32/64-bit
Windows 8 32/64-bit
Windows 8.1 32/64-bit
o Operation with other operating systems cannot be guaranteed.
Installing the driver on a computer
Before you can use this unit to play files on a computer, you must first
download the dedicated driver from the following Esoteric download
page and install it on your computer.
Website address for driver software download
http://www.esoteric.jp/products/esoteric/usb/usb_driver_e.html
Install the dedicated driver software after downloading it from the
above download site.