Teac UD-501 - Manual (Page 19)

19
EN
There is no sound from one side of the headphones.
e Confirm that the headphones plug is inserted
completely.
Connections with a computer
Computer does not recognize this unit.
e This unit can be connected with computers run-
ning the following operating systems.
Apple Macintosh
Mac OS X 10.6 (Snow Leopard)
(Mac OS X 10.6.4 or later)
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
(As of October, 2012)
o Functions with the standard OS driver.
Microsoft Windows
Windows XP (32/64-bit)
Windows Vista (32/64-bit)
Windows 7 (32/64-bit)
o Requires installation of a dedicated driver
(page 13).
Operation with other operating systems cannot
be guaranteed.
Noise occurs.
e Starting other applications during playback of a
music file may interrupt playback or cause noise.
Do not start other applications during playback.
e When the unit is connected to a computer via a
USB hub, for example, noise might be heard. If this
occurs, connect the unit directly to the computer.
Audio files cannot be played back.
e Connect the computer with this unit and switch
to “USB” before starting the music playback soft-
ware and music file playback.
If you connect this unit and the computer, or
switch the input to USB after launching the music
playback software, the audio data might not play
back properly.
Since this unit uses a microcontroller, external noise and
other interference can cause the unit to malfunction. If
this should occur, unplug the unit's power from the outlet
and wait a little while before plugging the power in again
and retrying the operation.