Teac DM-24 New features - Manual (Page 3)

New features in DM-24 version 2.1
TASCAM DM-24 Version 2.1 Release Notes
3
Busses as effect input sources
Busses 1-8 can now be used as input sources for the
internal effects on the
PATCH page. This can be conve-
nient if all aux sends are already being used for other
purposes.
New features in HUI
The HUI page has changed considerably and new
functions have been added.
As only channel strips 1-8 are functional in HUI
mode, the keys on channel strips 9-16 have been
mapped to perform specific functions.
• Pressing the SHIFT soft key icon allows you to use
the faders as aux send level controls for the chosen
send. Pressing this soft key again returns the faders
to fader control of the DAW.
• MUTE keys 11-12 act as left bank and right bank
keys. These banks operate in 8-channel incre-
ments.
• SEL keys 11-12 act as left and right channel
advance keys. This is similar to the bank keys, but
these keys only “move” by one channel at a time.
• REC key 11 recalls the EDIT screen in Pro Tools,
while REC key 12 recalls the MIX screen in Pro
Tools.
• SEL 14 and SEL 16 make the waveform shorter
and longer (time axis) respectively.
• Pressing the SEL 15 key activates ZOOM. REC 15
key and MUTE 15 key make the waveform larger
and smaller respectively.
• MUTE key 10 selects the POD controls as pan con-
trols.
• REC key 9 selects SEND A, REC key 10 selects
SEND B, SEL key 9 selects SEND C, SEL key 10
selects SEND D, and MUTE 9 selects SEND E.
All of these functions are laid out clearly on the HUI
page as shown here.
Bug fixes
In addition to the features listed above, the DM-24
version 2.1 firmware release addresses all known
bugs.