Teac GT-R1 Addendum User Manual

Gt-r1, Addendum, 1list of new functions

Advertising
background image

TASCAM GT-R1

1

List of new functions

The following functions were added with firmware version
2.00.

1. Digital meter display on the Home Screen

A numerical display has been added to the meters.

2. Special recording functions

Track incrementing
Pre recording (PRE REC)
Record delay (DELAY)
File division (DIVIDE)

3. New BROWSE screen functions

New file operation (INFO)
New folder operation (ALLDEL)

Additional Home Screen function

Digital display for meters

The maximum level that occurs during a fixed interval is
shown numerically on the Home Screen and Recording
Screen (*).

[Home Screen]

[Recording Screen]

Special functions during recording

Track incrementing

Incrementing the track number manually
During recording, you can create a new file that has
a number at the end of its file name that is one higher
(incremented) and continue recording.
1 Press the

key during recording to create a new

file with the number at the end of the file name

incremented (increased) and continue recording in

this file from its beginning (00H00M00S).

You can increment even when paused.

CAUTION

You cannot increment if the total number of files

would exceed 999.
You cannot increment when the current file is only

two seconds or shorter.

When incrementing, if a file already exists with the

incremented file name, the number will be increased

again to create a new unique file name.
You cannot increment during overdub recording.

Automatic track incrementing according to file size
When a file reaches a designated size during recording, you
can set the unit to automatically create a new file with an
incremented file name and continue recording.
1 Press the

MENU

key to open the menu list screen.

Select

REC SETTING

and press the Á/π key to

open the

REC SETTING

screen.

2 Use the

SIZE

item to select the file size for

automatic incrementing.

Options: 64M, 128M, 256M, 512M, 1G, 2GB

(default setting)

CAUTION

You cannot increment if the total number of files would

exceed 999.

NOTE

The recording time differs for the same file size depend-

ing on the file format. Moreover, 23:59:59 appears if the

recording time is 24 hours or more.

Pre-recording

When the unit is in recording standby, the unit can record
the two seconds before the start of recording and include it
in the recording.
Use the following procedures to set pre-recording.
1. Press the

MENU

key to open the menu list screen.

Select

REC SETTING

and press the Á/π key to

open the

REC SETTING

screen.

2 Use the

PRE REC

item to turn pre-recording ON

or OFF.

Options: ON, OFF (default setting)

CAUTION

If the unit has been in recording standby for less

than two seconds, only the amount of time that the

unit has been in standby will be included
Pre-recording is not possible if the remaining space

on the SD card is three seconds or less.
When PRE REC is set to ON, overdub recording

cannot be used.

NOTE

Set DELAY to OFF when you set PRE REC to ON.

GT-R1

Addendum

D01072710A

Advertising