Teac FW-1884 - Manual (Page 39)

7 – Appendices
TASCAM FW-1884 Owner’s Manual
39
Analog I/O
DAC
Resolution : 24 bit
Dynamic range: 100 dB Fs=44.1kHz, A-weight, -60dB output
Group delay : 19.1 samples
Signal delay
< 1.5 ms Fs = 48.0kHz, LINE IN to STEREO OUTPUT
< 0.75 ms Fs = 96.0kHz, LINE to STEREO OUTPUT
THD (Level: +4dBu)
< 0.005 % 20 Hz - 20 kHz, LINE IN to INSERT SEND
<0.008% 1 kHz, LINE IN to STEREO OUTPUT
Frequency response (@ nominal level)
20Hz - 20 kHz ±0.5 dB, MIC/LINE IN to INSERT SEND
20Hz – 40kHz +0.5dB / –1.0 dB, MIC/LINE IN to INSERT SEND
20Hz - 20kHz ±0.5 dB LINE IN to SURROUND/STEREO MONIisR
OUTPUT
20Hz – 40kHz +0.5dB / –1.5 dB, LINE IN to SURROUND/STEREO
MONITOR OUTPUT
CODEC: AK4528 specifications Noise level (20Hz – 20kHz, TRIM max, 150 ohm)
< -124 dBu
(EIN) MIC IN to INSERT SEND
< –64dBu LINE IN to STEREO OUTPUT
< –64dBu LINE IN to SURROUND MONITOR OUTPUT
Crosstalk (@ 1kHz)
> 80dB STEREO/SURROUND MONITOR OUTPUTS
Power requirements
100V AC,
50/60Hz
100V / 200V type
120V AC, 60Hz
230V AC, 50Hz
240V AC, 50Hz
Power consumption
23 W
Dimensions
W 22.9 x H 5.4 x 18.9
W 582mm x H 136mm x D 481mm
Weight
22.7 lbs (10.3 kg)