Teac MMR-8 v4.6 - Manual (Page 6)

TASCAM MMR-8/MMP-16 Version 4.6 Owner’s Manual Update
- 5 -
HFS+ DVD RAM media:
Previously, the MMR-8/MMP-16 would have problems working with HFS+ formatted DVD-RAM
media. This has been corrected with version 4.6
OMF Exports:
Previously, some users would experience errors when performing OMF exports of a Pro Tools
project. The OMF export process has been improved and should now work reliably with version
4.6
Old vs. New Hardware Sync:
On rare occasions, users would experience a small loss of synchronization stability between "old
hardware" and "new hardware" MMR-8/MMP-16 machines. This has been corrected with version
4.6
Special Alpha character support:
Previously, users would experience difficulty-mounting disks containing Pro Tools projects that
utilized special alpha characters such as an "Umlaut" in file and session names. This has been
corrected with version 4.6
Random noise at Punch-In:
Previously, it was possible the “M-2” version MMR-8 could punch-in before the internal digital
clocks were locked. This would result in a “snat or click” at the punch-in point. This has been
corrected with version 4.6
Hardware Compatibility:
Version 4.6 will work on both old (M-1) and new (M-2) hardware versions of the MMR-8 and
MMP-16.
Please be aware that some of the enhancements included in version
4.6 are only available on new (M-2) Hardware as noted.