Teac SS-R05 - Manual (Page 6)


TASCAM SS-R1
1 − Introduction
Thank you for your purchase of the TASCAM SS-R1 Solid
State Stereo Audio Recorder.
Before connecting and using the unit, please take time
to read this manual thoroughly to ensure you understand
how to properly set up and connect the SS-R1, as well as
the operation of its many useful and convenient functions.
After you have finished reading this manual, please keep it
in a safe place for future reference.
NOTE
This product is designed to help you record and repro-
duce sound works to which you own the copyright,
or where you have obtained permission from the
copyright holder or the rightful licensor. Unless you
own the copyright, or have obtained the appropriate
permission from the copyright holder or the rightful
licensor, your unauthorized recording, reproduction
or distribution thereof may result in severe criminal
penalties under copyright laws and international
copyright treaties. If you are uncertain about your
rights, contact your legal advisor. Under no circum-
stances will TEAC Corporation be responsible for the
consequences of any illegal copying performed using
the SS-R1.
About this manual
In this manual, we use the following conventions:
The names of keys and controls are given in the follow-
ing typeface:
MENU.
If a preset indicator in the display (i.e. one which cannot
change, but is either on or off) is shown, this is shown as
follows:
A_TRACK .
•
•
When the alphanumeric portion of the display shows a
message (inc. pop-up), selectable value (i.e. values of
DB), or ON/OFF selection (i.e. SRC ON), this is shown
in the following typeface:
MOVE
•
Supplied accessories
In addition to this manual, the SS-R1 has been packed with
the following:
RC-SS1 remote control unit (with 5m cable) .................1
AC power cable ...............................................................1
A rack-mounting screw kit (screws and washers) ..........1
Security Screw ................................................................2
A warranty card ..............................................................1 •
•
•
•
•
Contact your TASCAM supplier if any of these items are
missing.
Features of the SS-R1
A two-channel audio recorder that uses CompactFlash
cards.
Can be mounted in a single rack space.
Allows recording and playback of 16-bit linear PCM
audio or MP3 audio, at sampling frequencies of 44.1
kHz or 48 kHz.
Provides parallel and serial control ports to allow
control from outside.
Flash Start function allows playback to begin instantly.
Playback control functionality such as Pitch Control and
Key Control. •
•
•
•
•
•
Play lists and folders can be used to freely specify the
range of playback.
Track editing functionality is provided (for linear PCM
audio only).
An internal clock is provided for time stamping.
Balanced and unbalanced analog audio inputs and
outputs as well as coaxial digital audio input and output
are provided.
Wired remote control for reliable operation is provided.
A PS/2 keyboard can be connected to control the unit or
to enter text. •
•
•
•
•
•
Rack-mounting the unit
If you are mounting the unit in a rack, leave 1U of space
above it and 4 inch (10 cm) or more of space at the rear.
Use the rack-mounting kit to mount the unit in a standard
19-inch equipment rack, as shown in this section. Remove
the feet of the unit before mounting.