Teac US-2400 Quick Start - Manual (Page 2)

TASCAM US-2400 2
Setting up the US-2400 with your DAW application
As well as a Native mode, the US-2400 can be used with Pro Tools in HUI
emulation mode, and also provides Mackie Control emulation. There are
three variants of the Mackie Control emulation mode, to allow for compat-
ibility with three other common DAW applications.
Set the emulation mode in the following way:
1 With the US-2400 power in standby mode (press the POWER key so
that the indicator pulses), press and hold the master fader’s SEL key
and then press and hold one of the AUX keys as shown below.
2 Turn on the US-2400 power (press the POWER key) while holding
down the master SEL key and one of the AUX keys.
Mackie Control
emulation mode,
optimized for
Sonar.
Mackie Control
emulation mode,
optimized for Logic.
HUI emulation
mode. Use this
mode with Pro
Tools.
Mackie Control
emulation mode,
optimized for
Digital Performer.
US-2400 Native
mode.