Totalizer, Serial number, Software version – Tecfluid MT03F User Manual
Page 26: Brightness, Batching
26
12 BATCHING
A batching process is performed using the following parameters:
-
Preset value. Is the amount to be dispensed. The MT03F can work with one or two
presets.
-
Partial counter. Indicates the batching process. Its value is zero at the start of a batch
and increases when the MT03F receives signal from a flowmeter.
11 BRIGHTNESS
With this option the screen backlight can be adjusted.
8 TOTALIZER
It has 8 digits and 2 decimals. Decimals are lost as more integer digits are needed.
To reset the totalizer, see the section 5 on page 14.
9 SERIAL
NUMBER
In this section the converter serial number is shown.
10 SOFTWARE
VERSION
From the main menu, if “Software version” is selected, the screen will show this data and
the corresponding date.